Skip to main content

Is Dlink DIR-825 A good router?

Is Dlink DIR-825 A good router?

Its performance is merely acceptable and its range is poor compared with other Wireless-N routers, including other D-Link units, but we nonetheless recommend the DIR-825 for its stability, SharePort feature, ease of use, and the fact that you can get it for about $140–a very good deal for a true dual-band router.

How do I use my D-Link 825 as a repeater?

  1. To use your DIR-825 as a repeater, the software version will need to 1.02 or 3.01-3.06. Firmware version 7.00 is not supported.
  2. After the router has rebooted, you will need to disconnect the cable and reconnect after 5 seconds.

How do I setup my D-Link 825?

Configuration for D-Link DIR-825

  1. Visit the router’s IP address ( in a new browser window.
  2. Enter the router password.
  3. Click on the Manual Internet Connection Setup button at the bottom.
  4. Enter the OpenDNS addresses in Primary DNS Server and Secondary DNS Server fields.


D-Link DIR-825 MU-MIMO Gigabit Wireless Router, Dual Band, 1200 Mbps Wi-Fi Speed, 5 Gigabit Port, 4 External Antenna, Router | Access Point |Repeater Mode, Black.

How do I log into my DIR-825 router?

By using a web browser of your choice and entering the IP address of your DIR-825 rev B1 router in the address bar you will load the login screen. You can find the ip address on the back of your router. Now enter the default username and password of your router and you will be granted access to its admin panel.

What is MU MIMO router?

MU-MIMO Benefits Multi-user, multiple-input, multiple-output technology—better known as MU-MIMO (a.k.a. Next-Gen AC or AC Wave 2)—allows a Wi-Fi router to communicate with multiple devices simultaneously. This decreases the time each device has to wait for a signal and dramatically speeds up your network.

What is MIMO router?

What is the username and password for Dlink 825?

The default username for your Dlink DIR-825 is admin. The default password is (blank). Enter the username & password, hit “Enter” and now you should see the control panel of your router.

What is the dir-825 Wi-Fi router?

The DIR-825 is designed for users looking to get a true HD wireless connection that can handle multiple HD video streams throughout the house, while being backward compatible with existing 802.11g and 802.11a products. Max TX Power assumes used regulatory domain is Canada/USA/Haiti.

Does the dir-825 series support b1/e1 revision?

The default firmware claims B1 and even /proc/cpuinfo claim to be B1 revisions even though the packaging and the sticker say B2. Update!!! D1/E1 revision could be supported. You can find some useful information on the forum, as well as G1, due to project similarities. WARNING: The DIR-825 series is prone to hardware failure of the Ethernet ports.

What do the LEDs on the dir-825 mean?

The DIR-825 has 11 blue and 2 orange LEDs: The four LAN LEDs are controlled by the switch chip. By default they show link and blink for activity. They are LED Bank 0.

How do I install DD-WRT on a D-Link dir-825?

To install dd-wrt on a D-Link DIR-825 you can flash it directly from the router’s web admin page (yes, that is correct… from D-Link’s standard web interface). These are the steps to follow: NOTE – the router’s web admin page is NOT the D-link firmware webflash interface, it is the hidden menu that is accessed as per the instructions below.