Skip to main content

How do you fix trouble code P0174?

How do you fix trouble code P0174?

How to fix the P0174 code

  1. Cleaning or replacing the mass airflow.
  2. Replacing a defective oxygen sensor.
  3. Changing the vacuum line.
  4. PCV valve replacement.
  5. Changing the EGR valve.
  6. Replacing brake booster if it has leakage.
  7. Replacing the valve cover gasket.

What causes system too lean?

The lean condition can be caused by a vacuum leak, which introduces more air into the air-fuel mixture, or by a weak fuel system, which does not input enough fuel into the air-fuel mixture.

Can a clogged fuel filter cause a lean code?

check engine light comes on: while the fuel filter is not directly connected to the engine computer, a blocked fuel filter can trigger a variety of trouble codes, including: low fuel pressure. lean running condition.

Can a dirty air filter cause P0174?

Sometimes the Air Flow Sensor and the sensing wire get covered with dirt, dust, or oil residue, which can also set a P0174. Cleaning the sensor might hold off problems for a while, but eventually, the MAF sensor should be replaced. Always make sure the Air Filter and its enclosure are dirt-, dust-, and oil-free.

What are the p0171 and p0174 codes for the Acura TL?

P0171 and P0174 both indicate that there is a lean condition present in your Acura TL. By themselves, these are some of the most common OBD2 codes. When they appear together, it indicates that the entire engine is running lean.

What does p0174 mean on a fuel trim system?

P0174- Fuel Trim System Lean → Bank 2: P0174 indicates that the side of the engine with the first cylinder (Bank 2) is running lean. On inline engines, this code is not available, since there is only one “bank” of cylinders.

What does the O2 sensor code p0171 mean on a car?

If the P0171 is combined with the P0174 code, it’s very likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replace the air filter and clean the air flow meter. If the problem persists the front oxygen (O2) sensor may need to be replaced.