What is 1000basesx SFP?
1000BASE-SX is a fiber optic Gigabit Ethernet standard for operation over multi-mode fiber using a 770 to 860 nanometer, near infrared (NIR) light wavelength. The standard specifies a distance capability between 220 meters and 550 meters.
What is a SFP used for?
Small form-factor pluggable, or SFP, devices are hot-swappable interfaces used primarily in network and storage switches. The SFP ports on a switch and SFP modules enable the switch to connect to fiber and Ethernet cables of different types and speeds.
What is the difference between SFP and SFP?
SFP and SFP+ transceivers are virtually identical in size and appearance. The primary difference is that SFP+ is an updated version that supports higher speeds up to 10Gbps. The difference in data rate also accounts for a difference in transmission distance—SFP typically has a longer transmission distance.
What is SFP and its types?
The small form-factor pluggable (SFP) is a compact, hot-pluggable network interface module used for both telecommunication and data communications applications. An SFP interface on networking hardware is a modular slot for a media-specific transceiver in order to connect a fiber-optic cable or sometimes a copper cable.
What does 100Base-TX mean?
100BASE-T is an enhanced form of Ethernet 10BASE-T and a network standard used for fast data transfer rates up to 100 Mbps. 100BASE-T is 10 times faster than standard Ethernet and, like standard Ethernet, it follows the Carrier Sense Multiple Access/Collision Detection (CSMA/CD) technique to avoid collision.
What is 100BASE LX10 SFP?
Cisco 100BASE-LX10 SFP The Cisco 100BASE-LX10 SFP operates on ordinary single-mode fiber-optic (SMF) link spans up to 10 km long. GLC-FE-100LX modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco switches and routers.
What is the temperature range of the 100BASE-T SFP?
The 100BASE-T SFP operates on standard Category 5 unshielded twisted-pair copper cabling of link lengths up to 100 m (328 ft). It supports Industrial temperature range of -40 to 85C.
What type of cabling is used in Cisco 100 base?
Cisco 100BASE-T Copper SFP The 100BASE-T SFP operates on standard Category 5 unshielded twisted-pair copper cabling of link lengths up to 100 m (328 ft). It supports Industrial temperature range of -40 to 85C.
What is the difference between GLC-fe-100fx and Cisco 100BASE-FX?
The Cisco 100BASE-FX SFP operates on ordinary multimode fiber-optic (MMF) link spans up to 2 kilometers (km) long. GLC-FE-100FX modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco switches and routers.