Table of Contents
Where is the model number on an Andersen storm door?
Every storm & screen door has a factory-applied silver tag on the hinge of the door, which contains the door’s unique serial number. The serial number tag should be visible when the storm or screen door is in the open position. If you need additional assistance, please contact us at 1-855-337-8811.
Are EMCO storm doors aluminum?
Easy-to-clean aluminum outer layer bonded to a moisture-resistant core for durability and weather protection.
Where is the serial number on an EMCO storm door?
The serial number for your storm door is located on a factory-applied label on the hinge rail and should be visible when the storm door is in the open position (see image to the right). If you are unable to locate the serial number on the hinge rail of your storm door unit, look around the perimeter of the storm door.
What is the difference between the 3000 and 4000 series storm doors?
Construction is similar to the less expensive 3000 series, but the unique mechanism for switching screen and glass panels in the 4000 models makes it worth the difference in price. Lower end units use thumb screws to hold the panels in place, which worked but is unsightly.
Where can I find parts for my Andersen or EMCO storm door?
Visit our help center for advice and troubleshooting information tailored specific to your storm door model. Andersen is committed to helping you find parts quickly and easily for your Andersen and/or EMCO storm doors. Visit our online parts store and use your serial number to find many of the most-common replacement parts for your storm door.
What is included in the Emco door part kit?
Emco Door Part Kit Includes: Outside Knob (x1), Inside Latch (x1), Key Cylinder Plate (x1), Deadbolt (x1), Latch Striker (x1), Installation Screws/Bolts NOTE: it has been reported by a customer that the replacement hardware required a larger hole in door. Therefore, it may require minor modification to install.
Is EMCO owned by Andersen?
EMCO Enterprises LLC is a wholly owned subsidiary of Andersen Corporation. EMCO manufactures and supports the limited warranties of andersen and emco storm doors. “Andersen”, “EMCO” and all other marks where denoted are trademarks of andersen corporation.
What kind of Hardware do you use for a Forever door?
Andersen / Emco Standard Store-in-door, Self-Storing traditional hardware for the Forever storm door. Special design for 1-1/2 inch thick door requires turning knob and pushing or pulling to open door. To see how handle/latch works, see our video.