Skip to main content

How do you rotate rotors in space engineers?

How do you rotate rotors in space engineers?

To rotate the advanced rotor, go into the control panel and adjust the velocity to either a positive or negative value. The higher the value, the faster the rotor will spin. The amount of mass the rotor has on top will affect its speed and torque.

What is rotor displacement in space engineers?

The Rotor displacement can be used to attach two rotors together on the same grid. To line up two connecting rotors with the grid (ship) it is placed on, set Rotor displacement at -5.95 cm. Each rotor must be set to this displacement, for a total of 11.9 extra cm between the blocks.

How do you get a large ore detector on a small ship?

Place the LG Ore Detector with a Advanced RH on the end on the gear. Fly your ship to back in to the rotor head in 3rd PV. You will see the ship try to lock on. Go to the rotor and select attach.

Are rotors worth turning?

If your rotor surface is smooth there is generally no need to have them turned. If, however, you have warping, or rough spots they should be turned, or replaced if need be. This is easily detected if you have a solid, non-pulsing braking action when you press down on the pedal.

Can I turn my rotors?

Rotors can be turned only about 1 or 2 millimeters before they become too thin for safe use and will have to be discarded and replaced. Brake rotors that have been repeatedly over heated may warp and create a vibration in the wheel. This warping will significantly wear out your tires and suspension systems.

Do hydrogen engines work in atmosphere space engineers?

Hydrogen thrusters are good for both atmospheres and space travel and are by far the strongest. Some players use them to get from a planet into space or when doing long-distance travel, while other players will only use hydrogen because they work anywhere.

How far do hydrogen thrusters damage space engineers?

6 blocks length
As all thrusters, large hydrogen thrusters cause damage to blocks up to 6 blocks length in front of them, and small thrusters up to 3 blocks length.

Do adding more ore detectors stack?

The range of multiple Ore Detectors does not stack, ranges just overlap.

How do you get silver space engineers?

Yield. Silver ore can be processed in a Refinery to produce Silver Ingots at a 10% ratio. Which is to say 1000 Kg of ore will produce 100 Kg of ingots. 374 kg of silver ingot can be produced in a refinery in one hour, without yield of speed modules.

What is a rotor on a ship?

The Rotor is a mechnical block that acts as a swivel for rotating structures on stations and ships. The rotor will conduct power and computer access from one part to another. Blocks connected by rotors will appear in different colors in the control panel.

Can you put a small rotor on a large rotor?

It’s an interesting fact that small rotor parts fit on large rotor stators. This means that you can create grids that are a mix of large and small grid blocks. For example, through a hybrid rotor, you can attach a large grid ore detector to a small-grid ship.

How do I remove the large rotor part from the engine?

When you open the control panel, you see a Detach button that lets you drop the large Rotor Part.

What does the advanced rotor do?

The Advanced Rotor additionally connects the Conveyor system of the main grid and the subgrid. A workaround exists where you use rotors to attach small-grid and large-grid blocks.